Rhopoint InstrumentsLow-gloss surfaces · Remote-head testing

Novo-Gloss Flex 6060° Remote-Head Glossmeter

Bring gloss measurement to small, curved and difficult-to-reach surfaces. A lightweight remote head and dedicated low-gloss scale help you check finishes that are challenging for a conventional instrument.

60° glossGU & GUh scalesRemote head
  • Reach small areas and non-flat components
  • Resolve small changes in low-gloss finishes
  • Discuss adaptors for your sample geometry
Featured configurationNovo-Gloss Flex 60Order code: A4000-020.2

Ask Novasys about suitability, accessories and a quotation.

03 9752 3766
Your Australian distribution partner

Supplied and supported locally by Novasys Group.

Product datasheet & manual
Local expertise Australian application adviceProduct selection Instrument & accessory supportOngoing support Calibration & repair enquiries
Measure the finish where it matters

Low-gloss checks.
Less accessible parts.

A finished component may have a small test area, a curved profile or a location that a standard glossmeter cannot reach. Start with the actual part and the finish you need to control.

Send Novasys sample photographs, dimensions and your test requirements. We can help you assess the Flex 60 and discuss suitable measuring adaptors.

Built around the measurement task

Choose the head, scale
and positioning method.

Define a consistent test location and handling procedure before comparing samples or batches.

60° remote head

Reach suitable small, curved and recessed measurement areas.

Low-gloss resolution

GUh provides 0.01 GU equivalent resolution for low-gloss finishes.

Adaptors for your part

Discuss standard, magnetic steel-surface and custom positioning options.

Batch reporting

Review statistics, graphs and pass/fail limits, then transfer results for reporting.

Novo-Gloss Flex 60 remote measuring head with interchangeable adaptors
Bring the head to the surface

Control the position.
Repeat the check.

A suitable adaptor helps locate the head on the intended area. For formed parts, define the contact points, orientation and handling method as part of your testing procedure.

Discuss your sample geometry with Novasys before selecting the setup. A smaller or curved part still needs to be assessed for measurement suitability.

Technical details

Novo-Gloss Flex 60 specifications

Featured model: Novo-Gloss Flex 60
60° remote-head measurement geometry.

Measurement & instrument specifications
Gloss angle60°
GU range / resolution0–125 GU / 0.1 GU
GU repeatability / reproducibility±0.2 GU / ±0.5 GU
GUh range0–125 GUh, equivalent to 0–12.5 GU
GUh resolution0.1 GUh, equivalent to 0.01 GU
GUh repeatability / reproducibility±0.5 GUh / ±2.0 GUh
Measurement area6 × 12 mm
StandardsISO 2813, ASTM D523, ASTM D2457, DIN 67530, JIS 8741, JIS K 5600-4-7
BatteryRechargeable lithium-ion; 14,000 readings per charge
Memory8 MB; up to 2,950 readings
Data transferUSB and Bluetooth
Operating conditions15–40°C; up to 85% RH, non-condensing
Instrument dimensions / weight80 × 150 × 35 mm (H × W × D) / 392 g
Head dimensions / weight60 × 110 × 28 mm (H × W × D) / 109 g
Order codeA4000-020.2

Specifications shown are for Novo-Gloss Flex 60. The GUh low-gloss scale is not available on Flex 60-X. Refer to the current manufacturer datasheet for performance conditions.

Applications

What finish do you need to check?

Tell us about your samples and acceptance criteria so we can help you assess suitability.

Confirm the right configuration

Flex 60 and Flex 60-X
are different models.

This page features Novo-Gloss Flex 60, with its additional GUh low-gloss scale and interchangeable measuring adaptors.

Custom curved-surface adaptor for the Rhopoint Novo-Gloss Flex 60

Custom adaptors are application-dependent. Confirm the part geometry and measurement setup with Novasys.

Product resources

Datasheet, manual & manufacturer information.

Before you enquire

Novo-Gloss Flex 60 FAQs

Speak with your local Novasys team about product selection and support.

What is the difference between Flex 60 and Flex 60-X?

This page features Flex 60. It includes the additional GUh low-gloss scale and interchangeable measuring adaptors. Flex 60-X is a different configuration. Ask Novasys to confirm the model and supplied accessories before ordering.

What does the GUh scale add?

It provides finer resolution for low-gloss surfaces. On the Flex 60, 0.1 GUh corresponds to 0.01 GU. Record the scale used with your results so readings are interpreted correctly.

Does it measure haze or DOI?

No. Novo-Gloss Flex 60 measures gloss at 60°. For reflection haze, DOI or RIQ requirements, ask Novasys to compare the Rhopoint IQ range.

Can it measure any curved part?

Suitability depends on sample geometry, available area and how the head is positioned. Provide photographs, dimensions and the intended test location so we can discuss a suitable approach.

Can I request a custom measuring adaptor?

Yes. Tell us about the shape, material and finish of the part, and where the measurement needs to be taken. Novasys can discuss the information needed to assess a custom adaptor.

How do I request pricing and support in Australia?

Use the product enquiry pop-up or call Novasys Group, a Rhopoint Instruments distribution partner in Australia. We can discuss the instrument, adaptors, documentation and ongoing calibration requirements together.

Your Australian Rhopoint distribution partner

Bring gloss control
to difficult-to-reach parts.

Tell us what you test. We’ll help you plan the next step.

Or call 03 9752 3766
Explore the full Rhopoint range
Local knowledge. Practical advice.

Enquire about Novo-Gloss Flex 60.

Tell us about your samples and testing requirements. Our Australian team will help you confirm suitability, accessories and quotation details.

03 9752 3766info@novasys.com.au

This opens your email app with your enquiry ready to send.