20° gloss
Measure high-gloss finishes with a compact remote measuring head.
Product viewManufacturer photography · Select a thumbnail to explore. Adaptors shown are application-dependent; confirm your supplied configuration with Novasys.
Bring appearance measurement to small, curved and difficult-to-reach surfaces. A compact remote head helps you assess gloss, haze and reflected image clarity on finished parts.
Ask Novasys about suitability, accessories and a quotation.
03 9752 3766Supplied and supported locally by Novasys Group.
Large, flat test panels are useful references, but a finished component can present a different measurement challenge. Start with the area you need to test, the curvature and the finish you need to control.
Novasys can help you assess the IQ Flex 20, compare adaptor options and plan a repeatable measurement approach for your samples.
Use appearance measurements to investigate the finish differences that matter to your product and your customers.
Measure high-gloss finishes with a compact remote measuring head.
Assess reflectance haze, DOI and RIQ alongside gloss.
Bring the measuring head to areas a conventional instrument cannot easily reach.
Match the contact and spot size to your sample geometry.

Repeatable results depend on the sample and how the measuring head is located. A reduced spot does not automatically make every small or curved part suitable for testing.
Send Novasys photographs, dimensions and a description of the area you need to measure. We can discuss adaptor selection and the appropriate next step.
Featured model: IQ Flex 20
20° remote-head measurement geometry.
| Gloss angle | 20° |
|---|---|
| Gloss range | 0–2,000 GU |
| Gloss resolution | 0.1 GU |
| Standard measurement area | 6 × 6.4 mm |
| Gloss repeatability | 0–100 GU: 0.2 GU; 100–2,000 GU: 0.2% |
| Gloss reproducibility | 0–100 GU: 0.5 GU; 100–2,000 GU: 0.5%* |
| DOI / RIQ range | 0–100 |
| RSPEC range | 0–2,000 GU |
| Haze units | HU or LogHU; 0.1 HU resolution |
| Haze / DOI standard | ASTM E430 |
| Battery | Rechargeable lithium-ion |
| Typical operation | 6 hours; 4,000+ readings per charge |
| Recharge time | 4 hours using mains charger |
| Memory | 8 MB; up to 999 readings |
| Dimensions, excluding head | 150 × 79 × 34 mm (H × W × D) |
| Weight | 550 g |
| Order code | A6000-016 |
* A mirror gloss calibration standard is required to achieve the stated high-range reproducibility. Refer to the current manufacturer datasheet for full performance conditions.
Tell us about your samples and acceptance criteria so we can help you assess suitability.
Discuss standard, reduced-spot, curved-part and custom positioning options before selecting your setup.

Adaptor suitability varies with sample geometry and finish. Recalibrate when changing adaptors, following the manufacturer’s procedure.
Speak with your local Novasys team about product selection and support.
IQ Flex 20 uses a compact remote measuring head for access to small and curved parts. The standard IQ has a different instrument format. Tell Novasys about your samples so we can help you compare the options.
No. IQ Flex 20 uses a 20° geometry. Ask Novasys if your test method requires other angles or if you are comparing readings from existing equipment.
Suitability depends on curvature, part size, finish and adaptor selection. Send sample photographs, dimensions and the intended test location so we can discuss a suitable approach.
Start with the size and shape of the area you need to measure. Reduced-spot, curved-part and custom options serve different applications. Confirm the adaptor and calibration procedure with Novasys before ordering.
Provide a DXF drawing of the part, clear photographs and a marked measurement location. Include your finish type and the appearance properties you need to control.
Use the product enquiry button or call Novasys Group, a Rhopoint Instruments distribution partner in Australia. We can discuss the instrument, adaptors, calibration requirements and quotation details together.
Tell us what you test. We’ll help you plan the next step.