Christian Maier maierGROUPMulti-channel rotary unions · Separate media circuits

Rotary Joints Series MPChristian Maier

Multi-channel rotary joints for routing different media or pressure circuits through one rotating assembly. MP configurations can be developed around the machine’s channels, materials, seals and installation space.

Multiple channelsApplication-specific designMedia separation
  • Route suitable media through separate channels
  • Specify the pressure and flow requirements for each circuit
  • Discuss electrical or control integration where required
Product familyMP seriesSize, seals & connections selected for the duty

Ask Novasys about configuration and a quotation.

03 9752 3766
Local Australian supply & support

Product advice and enquiries through Novasys Group.

Catalogues & technical information
Application advice Media, pressure, temperature & speedConfiguration support Seals, sizes & connectionsReplacement enquiries Identification & spare-part options
Select for the actual operating duty

Bring the circuits together.
Keep the media separate.

MP rotary joints can carry two or more media, or the same medium at different pressure levels, through one unit. The manufacturer lists air, cooling water, hydraulic oil and vacuum among the application options.

Channel count, circuit duties, seals and dimensions are selected for the machine. Novasys can help you prepare the operating and connection details for an application-specific MP enquiry.

AirCooling waterHydraulic oilVacuum
Design features

Understand the design.
Specify the right version.

Configurable construction

Design, sizes, materials and seals are selected around the application.

Integration options

Discuss combined media transfer with power or control connections when the machine requires it.

Wear-focused coatings

The manufacturer describes MP-specific coatings that help reduce seal wear; suitability depends on the configuration.

Representative Christian Maier MP rotary joint
Configuration matters

Specify every channel
before selecting the assembly.

An MP enquiry needs more than an overall pressure or speed. Each circuit needs a defined medium, pressure, temperature and flow or vacuum requirement.

Provide a channel schedule and identify any electrical or control connections. Confirm the mounting envelope, rotor and housing connections, rotation pattern and interface requirements with the complete configuration.

Technical selection

MP series operating information

Confirm the exact type and duty before ordering.

Manufacturer information & selection conditions
Media listed by manufacturerAir, cooling water, hydraulic oil and vacuum
Channel arrangementTwo or more media, or circuits at different pressure levels, subject to design
Published pressure maximum350 bar in the series overview; allowable pressure is channel- and configuration-specific
Published temperature maximum160°C in the series overview; confirm medium and seal compatibility
Published speed maximum6,000 rpm in the series overview; confirm the exact design and operating cycle
Materials & sealsSelected for the media, loads and installation
Electrical integrationPower and control options subject to an agreed configuration
Dimensions & mountingApplication-specific; confirm drawings and interfaces
Surface coatingsMP-specific coating options described by the manufacturer
Required selection dataChannel schedule, media conditions, flow, speed, connections and mounting space

The overview maxima are not simultaneous guaranteed ratings for every channel or MP design. Confirm each circuit and the combined duty against the agreed configuration and manufacturer documentation.

Applications

Start with your machine
and operating conditions.

Support through Novasys

Identify the assembly.
Plan the next step.

For an existing MP unit, send the full type code, drawings if available, nameplate photographs and the function of each channel. Include any electrical interfaces and all special suffixes.

Novasys can discuss replacement identification and spare-part enquiries. An application-specific assembly needs a configuration review before a substitute is selected.

Product resources

Catalogues, technical information & support.

Before you enquire

MP Rotary Joint FAQs

Practical advice on selection and local support.

What is a multi-channel rotary joint?

It transfers multiple media or separate pressure circuits between stationary pipework and rotating equipment through one assembly. The channels and seals must suit their individual duties.

Which media can the MP series handle?

The manufacturer lists air, cooling water, hydraulic oil and vacuum. Suitability depends on the specified configuration, seals and conditions in each channel.

Can MP also carry electrical power or control signals?

The manufacturer describes combinations that can include power and control electronics. These are configuration-dependent options; provide the required electrical interfaces so they can be assessed with the media circuits.

Are 350 bar, 160°C and 6,000 rpm simultaneous ratings?

No. These are manufacturer series overview maxima. They do not define a guaranteed combined operating point for every MP configuration or channel. Each circuit and the complete duty need review.

What should I include in an MP enquiry?

Provide the number of channels, medium and conditions for each, required flows or vacuum, speed, duty cycle, connections, mounting dimensions and any electrical interfaces. A channel schedule is useful.

Can an existing MP be replaced from its size alone?

No. Similar external dimensions do not establish the internal channels, seals or interfaces. Send the full type code, suffixes, drawings and circuit details to Novasys for replacement identification.

Christian Maier · Local Australian support

Let’s specify the MP joint
your process needs.

Send the operating and connection details. We’ll help with the next step.

Or call 03 9752 3766
Explore the full Christian Maier range
Local knowledge. Practical advice.

Enquire about Christian Maier MP.

Tell us your media, pressure, temperature, speed and connections. Our Australian team will help confirm the configuration and quotation details.

03 9752 3766info@novasys.com.au

This opens your email app with your enquiry ready to send.