Self-supporting design
The housing is supported on the rotor; the complete mounting arrangement must follow the selected design.
Product viewManufacturer imagery and technical resources. Product view is representative; supplied configuration depends on your application.
A modular rotary-joint range for suitable water, steam and thermal-oil duties. H series joints use self-lubricating carbon plain bearings and a self-supporting design, with options selected for the heating or process application.
Ask Novasys about configuration and a quotation.
03 9752 3766Product advice and enquiries through Novasys Group.
H rotary joints cover a range of heating and process applications at suitable operating speeds. The manufacturer lists cooling water, hot water, steam and heat-transfer oil, with the actual duty determined by the selected design.
The modular assembly and self-supporting housing provide configuration options for the machine. Novasys can help review the medium, operating envelope and installation before a model is selected.
The housing is supported on the rotor; the complete mounting arrangement must follow the selected design.
Self-lubricating bearings remove the need for greasing those bearings during operation.
Connection and component options can be matched to the installation.
The manufacturer describes a rotor groove that becomes visible as the carbon seal ring wears.

For thermal-oil applications, an optional nitrogen blanket can limit contact with atmospheric oxygen. This is an application-specific option, not a standard inclusion for every H joint.
Special ATEX-certified versions and HWX inner-pipe arrangements are also configuration-dependent. State the operating environment, rotation direction and required approvals so these can be reviewed with the joint.
Confirm the exact type and duty before ordering.
| Media listed by manufacturer | Cooling water, hot water, steam and heat-transfer oil |
|---|---|
| Published pressure maximum | 28 bar in the series overview; confirm the actual variant and medium |
| Published temperature maximum | 300°C in the series overview; subject to the complete configuration |
| Rotational speed | Size-, pressure- and design-dependent; confirm the allowable speed from the current catalogue |
| Bearing type | Self-lubricating carbon plain bearings |
| Bearing greasing | No greasing or re-greasing of the carbon plain bearings during operation, as described by the manufacturer |
| Housing arrangement | Self-supporting design mounted on the rotor |
| Wear indication | Visible groove associated with carbon seal-ring wear |
| Thermal-oil option | Optional nitrogen blanket, subject to application requirements |
| Special certification | ATEX versions for specified configurations |
| HWX option | Manufacturer describes an inner-pipe clamping arrangement for nominal sizes 65–100; confirm suitability |
| Connections & dimensions | Depend on the selected joint and component arrangement |
The pressure and temperature values are series overview maxima, not a guaranteed combined operating point. Confirm the media, speed, pressure, temperature and exact model together. Self-lubricating bearings do not remove inspection and seal-maintenance requirements.
For an existing H or HWX unit, send the complete designation, suffixes, nameplate photos, dimensions and inner-pipe details. Add the operating medium, pressure, temperature, speed and any observed wear or leakage.
Novasys can discuss replacement identification and spare-part options. Follow the operating instructions and inspect the specified wear indication; do not treat a self-lubricating bearing as a guarantee of maintenance-free service for the entire joint.
Manufacturer application, configuration and dimensional data.
Open resource Inch catalogueImperial dimensional and selection information.
Open resource ManufacturerFurther product features and special options.
Open resourcePractical advice on selection and local support.
The manufacturer lists cooling water, hot water, steam and heat-transfer oil. The exact joint, seals and operating conditions determine suitability for the application.
The manufacturer describes self-lubricating carbon plain bearings that need no greasing during operation. The complete joint still requires the inspections and maintenance set out in its operating instructions.
The manufacturer describes a circumferential groove becoming visible on the rotor as the carbon seal ring wears. Follow the instructions for inspecting and interpreting the indication on the exact model.
No. The manufacturer describes it as an optional feature for suitable thermal-oil duties to limit contact with atmospheric oxygen. Confirm whether it is needed for your installation.
These are configuration-dependent options. Provide the required approval, operating environment, rotation direction, nominal size and inner-pipe arrangement so Novasys can help review the design.
Use the enquiry pop-up or call Novasys. Include the medium, pressure, temperature, speed, flow and connection details. For replacements, add the full type code, suffixes and installation photographs.
Send the operating and connection details. We’ll help with the next step.