Christian Maier maierGROUPModular rotary unions · Sensor-ready options

Rotary Joints Series DSChristian Maier

A modular rotary-joint range for water, thermal oil, air and technical gases. DS combines low frictional torque with mono- and duo-flow options and optional monitoring sensors.

DN 10–80Mono- & duo-flowOptional monitoring
  • Low-torque operation for suitable non-driven rollers
  • Modular seals, connections and inner-pipe arrangements
  • Optional seal-wear and process monitoring
Product familyDS seriesSize, seals & connections selected for the duty

Ask Novasys about configuration and a quotation.

03 9752 3766
Local Australian supply & support

Product advice and enquiries through Novasys Group.

Catalogues & technical information
Application advice Media, pressure, temperature & speedConfiguration support Seals, sizes & connectionsReplacement enquiries Identification & spare-part options
Select for the actual operating duty

Build the configuration
around your machine.

DS rotary joints support rotating heating, cooling and media-transfer duties. The modular design provides choices for connections, mechanical seals and inner-pipe arrangements, helping you specify the assembly your machine needs.

The manufacturer identifies non-driven rolls as a key application because of the series’ low frictional torque. Novasys can help review your operating conditions, replacement requirements and monitoring needs.

Cooling waterHot waterThermal oilAirTechnical gases
Design features

Understand the design.
Specify the right version.

Modular construction

Select the joint, connections and flow arrangement for the installation.

Mechanical sealing

Seal combinations are selected for the medium, temperature and operating duty.

Bearing protection

Improved bearing sealing helps protect bearings from leakage.

Optional sensors

Discuss seal-wear monitoring and other process sensors for compatible configurations.

Representative Christian Maier DS rotary joint
Configuration matters

Bring operating data
into the maintenance plan.

DS can be configured with sensor monitoring for seal wear and other operating parameters. The DSI designation identifies an integrated Sense W wear-sensor version in the manufacturer catalogue.

Sense L, Sense P/T, Sense S and Link C options can support leakage, pressure and temperature, speed and IO-Link communication. Confirm the joint, sensors and controls integration together.

Technical selection

DS series operating information

Confirm the exact type and duty before ordering.

Manufacturer information & selection conditions
Nominal size rangeDN 10–80; confirm the required size and configuration
Flow versionsMono-flow and duo-flow
Primary sealAxial mechanical seal
Secondary sealsO-rings
Bearing arrangementTwo ball bearings; manufacturer specifies lifetime lubrication up to 80°C
Water, seal combination 1−10°C to +80°C; 10 bar
Water, seal combination 3−10°C to +140°C; 10 bar
Thermal oil, seal combination 30°C to +160°C; 10 bar
Contaminated water, combination 4−10°C to +140°C; 10 bar
Water-glycol, combination 5−10°C to +120°C; 10 bar
Air, seal combination 5−10°C to +50°C; 10 bar
Speed & flow limitsDepend on nominal size, seal combination and mono-/duo-flow version; refer to manufacturer curves
MonitoringDSI wear-sensor configuration; other sensors and retrofit options subject to compatibility

Application data follows the manufacturer DS catalogue. Avoid combining maximum values. Technical-gas duties and any conditions outside the listed combinations require individual confirmation.

Applications

Start with your machine
and operating conditions.

Support through Novasys

Identify the assembly.
Plan the next step.

When replacing DP, DX or DXS equipment, send the full type designation and any special suffix. Modified or adapted joints require individual review; a series name does not establish interchangeability.

For DS spare-part or repair-kit enquiries, provide the complete configuration and nominal size. Ask Novasys to confirm current availability and the appropriate maintenance route.

Product resources

Catalogues, technical information & support.

Before you enquire

DS Rotary Joint FAQs

Practical advice on selection and local support.

What is the DS series used for?

DS transfers water, thermal oil, air or suitable technical gases between stationary pipework and rotating equipment. Its low frictional torque makes it relevant to non-driven rollers, subject to the chosen configuration.

Are monitoring sensors included?

Sensors are optional. The manufacturer describes a DSI configuration with integrated Sense W wear monitoring, plus other process sensors and communication options. Confirm the supplied sensor package and integration requirements with Novasys.

Can DS directly replace a DP, DX or DXS joint?

Do not assume interchangeability. The manufacturer specifically requires individual assessment of modified or adapted DP and DX/DXS versions. Send the full type code, suffixes, connection details and dimensions.

What are the pressure and temperature limits?

They depend on the seal combination and medium. The published table lists 10 bar for the combinations shown, with different temperature ranges for water, thermal oil, water-glycol and air. Maximum values must not be combined.

Does DS need lubrication?

The catalogue describes two ball bearings lubricated for life up to 80°C. Follow the operating instructions for your exact joint and temperature duty rather than treating this as an unrestricted maintenance-free claim.

How do I request a DS quote in Australia?

Use the enquiry pop-up or call Novasys. Include the medium, pressure, temperature, speed, flow rate, nominal size, connection details and whether monitoring sensors are required.

Christian Maier · Local Australian support

Let’s specify the DS joint
your process needs.

Send the operating and connection details. We’ll help with the next step.

Or call 03 9752 3766
Explore the full Christian Maier range
Local knowledge. Practical advice.

Enquire about Christian Maier DS.

Tell us your media, pressure, temperature, speed and connections. Our Australian team will help confirm the configuration and quotation details.

03 9752 3766info@novasys.com.au

This opens your email app with your enquiry ready to send.