Balanced mechanical seal
A compact seal design supports the intended thermal-oil operating duty.
Product viewManufacturer imagery and technical resources. Product view is representative; supplied configuration depends on your application.
A rotary-joint range developed for hot thermal oil and high-speed duties. DQ combines a balanced mechanical seal with a cooling arrangement to support demanding heating and process applications.
Ask Novasys about configuration and a quotation.
03 9752 3766Product advice and enquiries through Novasys Group.
DQ rotary joints are designed for thermal-oil applications where temperature and speed place high demands on the seal. The manufacturer identifies calenders, dryers and rotary reactors among the relevant applications.
The mechanical seal, cooling arrangement and operating conditions need to be considered together. Novasys can help you gather the information needed to discuss a suitable DQ configuration and quotation.
A compact seal design supports the intended thermal-oil operating duty.
Thermal oil cools and lubricates the seal to help control operating conditions and wear.
Monitoring can help detect abnormal cooling conditions and support maintenance planning.
ATEX-certified versions are available for specified applications; confirm the exact approval required.

The DQ manufacturer page describes a cooling unit that can be monitored to detect malfunctions early. The seal and cooling system are part of the application assessment.
Include your thermal-oil grade, supply and return conditions, operating cycle and proposed cooling arrangement in the enquiry. Confirm monitoring, installation and maintenance instructions for the exact unit.
Confirm the exact type and duty before ordering.
| Medium listed by manufacturer | Heat-transfer oil / thermal oil |
|---|---|
| Published pressure maximum | 13 bar in the series overview; confirm the variant-specific operating envelope |
| Published temperature maximum | 400°C for suitable thermal-oil configurations |
| Published speed expression | 130,000 / DN; confirm size, units and any applicable speed cap in the current catalogue |
| Primary seal | Compact, balanced mechanical seal |
| Seal thermal management | Cooling and lubrication using thermal oil |
| Cooling-system monitoring | Discuss the cooling-unit monitoring arrangement and required signals |
| Special certification | ATEX versions on request for specified configurations |
| Connections & dimensions | Depend on the selected nominal size and design |
| Maintenance | Follow the unit-specific instructions and operating conditions; confirm the service plan with Novasys |
Published maxima are series-level selection information. They do not establish an allowable combined pressure, temperature and speed. Confirm the complete duty, cooling conditions and exact variant before ordering.
For an existing DQ installation, send the complete type code, suffixes, nameplate photographs and dimensions. Include the oil grade, operating pressure, temperature, speed and cooling-system details.
Novasys can discuss replacement identification, spare-part enquiries and the information needed for manufacturer review. Confirm service intervals and the appropriate repair route for the actual operating duty.
Manufacturer application data, design information and dimensions.
Open resource Inch catalogueImperial dimensional and configuration information.
Open resource ManufacturerFurther product, cooling and monitoring details.
Open resourcePractical advice on selection and local support.
The manufacturer describes DQ for hot heat-transfer oil, also called thermal oil. Send the oil grade and operating conditions so Novasys can help confirm suitability.
No. The manufacturer publishes 400°C as a series overview maximum for suitable configurations. The exact variant, oil, cooling arrangement, pressure and speed must be checked together.
The seal is cooled and lubricated by thermal oil. Cooling-unit monitoring can help identify abnormal conditions, so the cooling system and monitoring requirements should be included in the specification.
The manufacturer offers special DQ versions with ATEX certification. State the required approval and operating environment; do not assume a standard DQ unit carries the necessary certification.
Use the current instructions and service requirements for the actual joint and duty. Temperature, speed, media condition and cooling performance all matter. Ask Novasys to confirm the applicable maintenance plan.
Use the enquiry pop-up or call Novasys. Include the thermal-oil grade, pressure, temperature, rotational speed, flow rate, connection details and cooling arrangement. Add the complete type code for replacements.
Send the operating and connection details. We’ll help with the next step.