|
SolarBee,
USA
The SolarBee is a floating
solar-powered pond and reservoir circulator
that can move up to 40,000 litres of water per
minute from almost any depth.
The SolarBee then gently
spreads this water over an area of up to 20 hectares
for continuous surface renewal. This mixing
action greatly accelerates the biological and chemical
processes that clean up wastewater, freshwater, and
potable water.
With over 1,000
solar-powered circulators installed in the past 5 years,
SolarBee is solving serious water quality and energy
problems in freshwater lakes, wastewater
lagoons, stormwater ponds, estuaries, potable
water storage tanks and other reservoirs.
Features and Benefits:
- Solar-powered, so NO ENERGY COSTS.
Operates both night and day.
- Minimal installation costs. No contractor required.
- SolarBee units have no gearbox or motor oils or
other possible contaminants.
- Only one moving part - The motor, which has a 25
year life expectancy!
- SCADA outputs available, optional Palm Pilot available
for shore monitoring.
- Two year parts and labour warranty.
- Low maintenance, long life stainless steel construction.
Basic SolarBee
Models
When
a SolarBee unit is installed in a freshwater
lake, reservoir, dam or pond, it will:
- Reduce blue-green algae blooms,
- Control taste and odour problems in drinking
water,
- Improve water clarity,
- When desired, can reduce or eliminate stratification,
- Improve DO and pH levels,
- Oxygenate lake bottom waters and sediments
to prevent release of hydrogen sulphide, iron,
manganese and phosphorus,
- Prevent seasonal fish kills, and
- Reduce nuisance aquatic weed growth.
The increase of oxygen levels, reduction of
organic buildup in sediment and reduction in
algae and aquatic weed will also improve the
habitat for fish spawning and growth.
|
Click picture
for close up view
|
For an overview on HOW SolarBee mixers will
help you improve - then maintain - freshwater
bodies, please download "Using
SolarBee in Lakes, Dams, Estuaries"
- a 3 minute video here
(2.8 Megabyte).
Back
to Top
|
When
a SolarBee unit is installed in a wastewater
lagoon, pond or dam, it will:
- Improve the secondary treatment - BOD/TSS/Algae
reduction,
- Improve the tertiary treatment - Reduce
ammonia and phosphorous,
- Provide consistent odour control,
- Improve sludge digestion - Reduce or eliminate
the need to dredge,
- Reduce short circuiting, and
- Improve DO and pH levels.
For an overview on HOW SolarBee mixers will
help you improve - then maintain - wastewater
bodies, please download "Using
SolarBee in Lagoons and other Wastewater Ponds"
- a 3 minute video here
(3.4 Megabyte).
Back
to Top
|
Installed in a
potable water storage reservoir, a SolarBee unit
will:
- Thoroughly mix the entire reservoir, reaching
all the dead spots,
- (Optionally) inject chlorine for complete
chlorine dispersion,
- Fit through a 70 cm x 70 cm opening and
can be assembled INSIDE the reservoir,
- Self-adjust to all water depths, and
- Reduce "long life" taste and odours.
For an overview on HOW SolarBee mixers will
help you improve - then maintain - potable storage
reservoirs and tanks, please download "SolarBee
PW - Using SolarBee to Mix Chlorinated or Chloraminated
Water Storage Tanks and Reservoirs"
- a 3 minute video here
(3.3 Megabyte).
Back
to Top
|
Basic
SolarBee Models
|
|
SB1250v12
- For circulating approximately 5,000 litres per
minute
|
Installation
into a reservoir |
|
|
Click picture
for close up view
|
|
| |
|
SB2500v12
and SB5000v12 - For circulating up to 20,000 litres
per minute
|
|
Click picture
for close up view
|
|
SB10000v12
- For circulating approximately 40,000 litres
per minute
|
|
Click picture
for close up view
|
For additional information please visit
our Client's section, contact
Novasys or visit SolarBee's website at www.solarbee.com
|
|
)
)
)
)
)
)
)
)
